Zeus NITRO Dragon Egg – assembly
More help & advice topics for the Zeus NITRO Dragon Egg:
Assembling the Zeus NITRO Dragon Egg
step 1
Take the Zeus NITRO Dragon Egg out of the packaging and remove the bag.
step 2
Unscrew the top of the Zeus NITRO Dragon Egg until it comes loose.
step 3
Gently take the motor hub out of the outer shell.
step 4
Charge the motor hub fully with the supplied cable.
step 5
After charging, push the button to turn on the motor hub.
Changing the play mode
step 1
Take the motor hub out of the shell.
step 2
Turn on the motor hub by pushing the button.
step 3
Cycle through the modes by pushing the button.
- Blue: Normal mode
- Purple: Hyper mode
- Yellow: Interactive mode
- No light: Off
step 4
Re-insert the motor hub into the casing.
step 5
Twist the top onto the base of the outer shell again.
step 6
Screw the top shut until you feel a slight bump or snap
step 7
Let the Zeus NITRO Dragon Egg bounce on the ground.
step 8
If the Zeus NITRO Dragon Egg goes into stand-by, tap it to activate it again.
